Hot Sale Sleeve Compensator

1.Description:

Sleeve type compensator is also called tubular expansion joints,Is the hot fluid pipeline compensator,
mainly used for line pipe and auxiliary axial thermal expansion displacement after absorption compensation,
is a kind of directly installed in any transport noncorrosive unidirectional and multidirectional of fluid pipeline
compensator.Sleeve type compensator. Widely used in the pipeline of urban heating, metallurgy, mining, power
generation, petrochemical and construction industries.

2.Structural characteristic:

Mainly include the sleeve tube (core), shell, sealing materials, etc,to compensate the axial expansion of the pipe and the axial rotation at any angle.With the characteristics of small volume , large amount of compensation and suitable for hot water, steam, oil medium,move by sliding between the sliding sleeve and outside sleeve, Finally achieving the compensation of the thermal expansion.

3.Installation method

General sleeve
1)sleeve type compensator in the installation shall be properly kept, prevent weathered and dust pollution.
2) when installation, should check the compensator model specification and design are consistent, the product surface
should be no bruising, pit, and the serious corrosion defect affecting the quality of products, etc.
3)the onetime compensator is consistent with the samples, the total length of finished products don't have to stretch or
compression, if there is new on the telescopic duct installation line, should again after alignment for installation
4)for twoway thrust compensator, a diagram must be in the note to the flow direction of medium of the installation, when
the medium is steam, lest compensator to form gas plug. In order to guarantee the compensation amount of the
compensator two directions are equal, when the design must have the two-way compensator is arranged between two
fixed point.
5)and the phase compensator on both ends of the welding section must break processing, water pressure test in accordance with requirements after welding (pressure test on both ends of the bolt should be tighten packing chamber)
without any leakage. Run 24 hours later, the packing room must be tight on both ends of the bolt again.
6) in order to guarantee pipeline without lateral displacement, only along the axial expansion, the expansion pipe side guide bracket. When two Zha compensator are axial displacement, then both sides should guide bracket, ensure that the axial displacement of compensator eccentricity plus or minus (+ -) not more than once.
7, the compensator can be the same as the pipe insulation waterproof structure, but can not exert blind on the expansion period .

4.Our Advantages:

(1)More than 24 years experience of manufacture
(2)The Main Drafting Units of Chinese Standard flexible rubber joint
(3)Compensator engineering research center of Zhengzhou city.
(4)Member of CNEA(China Nuclear Energy Association )
(5)ISO9001:2008 and ISO14001:2004 certificated by CNAS(China National Accreditation Service for Conformity Assessment)
(6)The largest vulcanizing equipment in China.


5. Delivery time & Packaging details:

 1)Delivery time:

Within 30 days after receipt of the deposit, or as your request:

2) Packaging details:

Unfumigation wooden case (out package) and plastic film and textile membrane(inside package). We can make change as your request.


Thanks for your attention. For more information, please feel free to contact us.
Sunny Yue
Mobile: +86-13303813898


Notes: If other satandard requirement or special flange need particularly customer made , please provide written drawing , standard , data , we can make customer-made for you .